These installation instructions are mainly intended for use in the MINI dealership network and by authorised BMW Service Centres. The target group of these installation instructions are technical personnel trained on MINI vehicles with corresponding technical know-how. All work is to be carried out with the aid of currently valid MINI repair instructions, schematic circuit diagrams, maintenance manuals and working instructions in rational order with the specified tools (special tools) while paying particular attention to valid safety regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problems occur, after a brief troubleshooting session (approx. 0.5 hours), contact the following:
1. Either your national sales company or your regional office or
2. The Support team via the Aftersales Assistance Portal (ASAP) using the optional technical parts support application.
Quote the VIN and the part number of the retrofit kit and provide a detailed description of the problem.
Do not archive the printout of these Installation Instructions as daily updates are conducted through ASAP!
The plugs on the CD changer must be disconnected and tied back on cars with SA 672 (CD changer).
Refer to ASAP for explanations of the pictographs.
All illustrations show LHD vehicles. Carry out the same procedure analogously on RHD vehicles.
Pictographs:
identifies information that draws attention to danger/hazards.
identifies information that draws attention to specific requirements.
identifies the end of an information or warning text.
Subject to technical modifications.
When installing cables/lines, particular attention must be paid to ensure that they are not bent, kinked or damaged. The costs incurred will not be reimbursed by BMW AG.
source
Tuesday, March 2, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment