Audi TT 8J Roadster A3 Cabriolet Convertible Top interface Installation Guide

Convertible top interface
• Convenient interior (one-Touch) operation - Control with the remote - Fully automated opening and closing.
• Usage of original connectors.
• Operate while driving up to the pace of 60 km/h (50 km/h to 60 km/h).
• Indication of opening and closing convertible top by flashing indicators (optional).

Installation instructions
All necessary connections have to be done at the control unit for the convertible top of the specific vehicle.
The control unit is located on different locations within the vehicle.
Location Audi TT 8J
The controlunit is located underneath the trunk cover on the right hand side. Please remove the trunk cover shown on image 1. Please remove all items like breakdown triangle and so on. Furtheremore take the control unit for auto roof out of its place (Image 2). Disconnect the connectors shon on image 2.

Please remove the trunk basement on the right hand side shown on image 3. Now you can ideal reach the connections for installation (Image 4).
Note: Please be gentle by removing the trunk basement. It will brake easily.

Location Audi A3 Cabriolet
The controlunit is located behind the cover of the trunk on the left hand side (image 5). Please remove the cover and loose the screws of the control unit (image 6). Remove the control unit and disconnect the connectors shon on image 7.

Please remove the housing of the 20-pole red connector. Please push the lock on the back of the connector shown on image 8 and remove the housing.

Please remove the Orange/Brown wire (PIN 10) and put it into chamber 2 of the delivered 2-pole connector (Image 11). Please remove the Orange/Green wire (PIN 9) and put it into chamber 1 of the delivered 2-pole connector.

source