Audi A6 C5 Air Conditioner Output Diagnostic Test Mode (DTM)

Initiating output DTM
- Star engine (vehicles up to model year 2001).
- Switch ignition on or start engine (vehicles from model year 2002).
Notes: The engine should not be running, if the actuation of "A/C Compressor Regulator Valve -N280-" or "A/C clutch -N25-" is being checked on vehicles from model year 2002. With engine running the A/C Control Head -E87- does not

Audi 4.2-liter V8 FSI Engine Self-Study Program 921603

The Self-Study Program provides introductory information regarding the design and function of new models, automotive components or technologies. The Self-Study Program is not a Repair Manual! All values given are intended as a guideline only and refer to the software version valid at the time of publication of the SSP.

Audi TT TTweakers Guide

This guide is about tweaking and troubleshooting the original Audi TT, also known as mk.I. The information is snatched from various sources, mostly from Audi related forums on the Internet. Even tough the information is believed to be correct, it is provided with no warranty of any kind.

Audi HomeLink System (Europe) with the transmitter unit in the front bumper

The HomeLink system provides a convenient way to replace up to three remote controls with a single built-in component. This innovative feature learns the radio frequency codes of most current remote controls used to activate garage doors, property gates, security systems, and home or office lighting.

Audi A6 C5 Service Reset

Service Reminder Indicator (SRI), resetting
The Service Reminder Indicator (SRI) must be reset during the pre-delivery inspection and after each oil change service or inspection service.
Pre-delivery inspection
The Service Reminder Indicator (SRI) can be reset in two different ways.
Using the VAG 1551 or VAG 1552 scan tool:
- Select adaptation channel 2 and input adaptation value "00000" or Using buttons on the instrument cluster:
- Reset "Service OIL" and "Service INSP"

Audi A6 C5 4.2L V8 5V BAS Secondary Air Injection Maintenance

The secondary air system is designed to enable catalytic converter to heat up and reach its operating temperature more quickly after a cold start.
Principle of operation
Due to extra mixture enrichment during cold-start phase, an increased amount of unburnt hydrocarbons is carried in exhaust gas. The secondary air system improves the afterburning (oxidation) process in the catalytic converter, and in this way reduces toxic emissions. Heat generated by oxidation accelerates "light off" of catalytic converter and significantly improves exhaust gas quality during warm-up.

Audi A4 Avant Roof-edge Spoiler Fitting Instructions

The adhesive kit is not included. It must be ordered seperatly according to the parts List. For compliance with the TÜV certificate and ABE other adhesives are not permitted. The adhesive kit, comprising cleaner primer and P1 adhesive, is obtainable as part number 000 071 785 Please read fitting instructions thoroughly before commencing installation. We recommend that fitting of the roof spoiler is carried out by a specialist workshop.

Audi A4 Avant Quick reference guide

Locking and unlocking the vehicle The central locking system locks and unlocks all the doors, the boot lid and the tank flap. It can be operated with the remote control or by turning the key in the lock. Operating the radio-activated remote control Press the appropriate button for about 1 second. 1 Unlocking button Open one of the doors or the boot lid within about 60 seconds, otherwise the vehicle will lock itself again automatically. 2 Unlocking button for boot lid Press the button for at least 1 second. 3 Locking button The turn signals will flash briefly when the car is locked to con- firm that the doors and the boot lid are closed properly. 4 Folding out the master key Press the release button. Folding away the master key Press the button and fold the key away.

Audi A3 Sportback Quick Reference Guide

This quick reference guide gives you a brief introduction to the main features and controls of your vehicle. However, it cannot replace the Owner’s Manual and the other manuals supplied with the vehicle; these contain important information and safety warnings. We wish you safe and enjoyable motoring with your Audi. AUDI AG Locking and unlocking the vehicle

Audi A6 C5 Instrument Panel Servicing

Component locations, overview 1 - Glove box Removing Page 68-1 2 - Driver's storage compartment Removing Page 68-7 3 - Steering column switch Removing Page 70-55 4 - Removing instrument cluster Repair Manual, Electrical Equipment, Repair Group 90; Servicing instrument cluster; Removing and installing instrument cluster 5 - Front section of center console Removing 68-28 6 - Center section of instrument panel Removing 68-31 7 - Reinforcing bracket for center section of instrument panel Removing Page 70-57 8 - Instrument panel end trim (left) Removing Page

2000 Audi A6 Airbag System Servicing

Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch the ignition off. Disconnect the battery Ground (GND) strap. On vehicles equipped with Audi Telematics by OnStar , switch-off the emergency (back-up) battery for the Telematic/Telephone Control Module prior to disconnecting vehicle battery After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual. After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar , switch-on the emergency (back-up) battery for the Telematic/Telephone Control Module Observe all safety precautions before starting work on any part of airbag system.

2007 Audi Metroproject Quattro Concept

The Audi Metroproject Quattro, has a battery pack in visibly mounted in the boot, and lit in tranquil blue lights with a charge indicator on the side.

The supermini Audi A1 should be available with a turbocharged gas engine, turbocharged diesel engine, ranging in size from 1.2 litres to 2.0 litres. A base model with an 80 horsepower, naturally aspirated 1.4 litre engine is also expected to hit showroom floors.

2008 Audi Q7 Hybrid

The seven-seat Audi Q7 SUV benefits from a ‘win-win’ upgrade this week courtesy of a new version of its 3.0-litre V6 TDI engine which brings lower emissions, higher power and torque and improved performance and fuel economy.

The even more efficient 2008 Model Year Q7 3.0 TDI quattro, which is also now equipped with an exhaust-cleansing Diesel Particulate Filter (DPF), is available for order in standard, SE and S line trim priced from £38,075 OTR. It forms part of a Q7 development programme which also includes petrol/electric hybrid versions that slash fuel consumption and emissions by over 20 per cent.

Audi A4L Installation Manual

This interface offers RGB, AV inserting onto A4/A5/Q5 panel in a plug-n-play way without cutting wire or using solders. It also offers these functions:
● super Stable,Clear and high-resolution RGB processing for Navigation map display.
● automatic camera switch.
● Optional adjustable reverse guideline display for helping reversing.
● Speed pulse, Reverse, Night lamp signals decoded from the CAN bus for the aftermarket navigation.

Installation location：
Remove the big plastic part shown by the yellow arrow，[No screws, only hooks]， then the total plastic can be taken down, and then the 4 screws can be seen.
Remove the 4 screws, then the panel can be taken down, the interface can be installed behind it.
There is a 10P cable which is carrying the signals, the interface will be inserted onto this cable.

6Pin connector to the Box：
Yellow：Battery 12V，BLACK：GND，
RED：ACC（can generated），
GREEN：REVERSE，
WHITE ： Switch signal[=5V when MODE pressed]。
GREY：Please do not use

source

Audi Gateway 500 with Dual FOT Installation

Installation of GATEWAY 500 unit Dual FOT
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location

Audi RVC Interface Installation Instructions

Installation requires special knowledge.
Do not install the unit yourself. For safe and reliable installation, consult a dealer having special knowledge.
• Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the steering wheel, brakes or other safety devices are used for installation of the unit, it may cause an accident.
• Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident.

2008 Audi R10 TDI Le Mans

The Audi R10 TDI remains unbeaten in the Le Mans 24 Hour race: in its third attempt, the diesel sportscar won the French endurance classic yet again. After the incredible thrill of the 76th edition of the race, Dindo Capello (Italy), Tom Kristensen (Denmark) and Allan McNish (Scotland) triumphed at the wheel of the Audi R10 TDI number 2.

Red Snub Mount Installation

1. Allow engine to cool before beginning installation.
2. Access the underside of the vehicle.
- APR recommends utilizing a lift for this installation.
- A jack with jack stands or ramps can be used if a lift is not available.
3. Remove the Splash Shield. With the flat head screw driver, unfasten all of the quarter turn screws. Note how splash shield is oriented in the car before removing.
4. Remove the three 6mm bolts from the front lower engine mount.

Audi To Most System VT-AUDIMOSTCK3100-100 Parrot CK3100 BlueTooth

This Interface has been designed to be installed together with the Parrot CK3100 Hands-free kit (NOT SUPPLIED WITH THE INTERFACE). It will not be necessary to use the Display supplied with the CK3100 kit, because the Interface allows to view all information about calls in the Audi OEM MMI Monitor.The Parrot BLUE Module and the suitable wiring will be needed to complete the installation.

1999.5-2001 Audi A4 (B5) HID conversion installation instructions

1. Take the kit out of the box and lay everything out. You can install either the ballasts or bulbs first but typically it is easier to install the bulbs first.
2. There are 3 T27 torx screws holding the headlight on. The 2 on top are visible in this picture.
3. with the 2 screws removed.
4. The third screw is shown here. A long extension is needed to get to it and an extendable magnet is helpful to retrieve the screw (or bit if it falls).
5. Disconnect the headlight and turn signal connectors and remove the headlight by pulling it toward the outside of the car and toward you.