Audi Gateway 500 with Dual FOT Installation

Installation of GATEWAY 500 unit Dual FOT
For All Audi vehicles: A good location to mount the GATEWAY 500 unit is at the CD Changer behind the glove box. If the vehicle is equipped with the in-dash CD Changer, install the GATEWAY 500 unit behind it. Interfacing in the MOST optical ring should be done as shown in the installation guide.
For All Audi vehicles NOT equipped with a factory CD Changer, the GATEWAY 500 interface shall be integrated into the optical MOST ring at the output of the head unit.
For All Audi vehicles equipped with a factory CD Changer, the GATEWAY 500 interface shall be installed at the factory CD Changer location

Configuration of the DIP switches on the GATEWAY 500 interface
When the unit is shipped, the DIP switch setting is not configured on your GATEWAY 500, depending on the car radio / navigation system you MUST choose the right DIP switch setting.
Please check the GATEWAY 500 interface before installation, whether the DIP switches are in the correct position.

Configuration of the CD text display - GATEWAY 500
The GATEWAY 500 enables display of song and artist information (CD text) on the screen of the navigation systems.
No Configuration is needed for the text display. The best text configuration is enabled by default in the software by Dension.

source