Audi A6/A8/Q7MMI CT90-AU06 Multimedia Interface Installation

This interface allows additional video inputs to the original MMI screen;
2 Video inputs/Automatically switchable camera input/ RGB Navigation input
There are also 2 video outputs and an audio output.
Selection can be made by infra red remote control or by the Nav button in the vehicle.
The remote control can also be used to adjust the picture via an on screen menu.
If a camera and reverse signal wire are connected it will automatically switch when the vehicle is put into reverse gear.
The vehicle shown in the installation instructions is a 2006 Audi A6 LHD. The installation and locations of units in the A8 and Q7 will be similar.
During the installation it is advised that the keys are removed from the ignition, until all components are reconnected.

Audio
To input the audio an FM transmitter or modulator will be required.
The radio tuner module can be found in the boot (as pictured)
Adapters will be required to plug in-line with the original antenna

Operation
With all connections made securely mount the interface module in the glove compartment recess.
Locate the infra-red receiver in a suitable position
Please now test the installation using the 'NAV button and the remote control.

Pressing the NAV button allows the user to switch between AV1 / AV2 /RGB and back to the Audi screen
PWR: Power
AV: switch between;
AV1 /AV2/V3/RG B/MMI
OSD: Function key, to setup program and adjust picture
SEL+/SEL-: move between main menu and sub menu
CON+/CON-: select menu and change picture values

source