2000-2001 Audi TT Coupe Compact Disc Changer Installation Instructions

The following pages contain CD Changer installation instructions for the model listed above.
Rear seat, removal
– Remove rear seat bottom.
– Disconnect left rear seat belt at body anchorage point.
– Remove left rear seat back.
– Disconnect left front seat belt body anchor at floor (located at rear of front seat).
Rear trim panel, removal
– Remove left rear seat back lock pin.
– Carefully remove left rear trim panel starting at top rear of panel. Fastening clips are as shown -arrows-.
– Once panel is removed, remove and discard
storage compartment from backside of panel (door and trim should remain attached to panel).
CD changer bracket fasteners, Installing
– Snap in 3 supplied metal screw inserts at locations shown -white arrows-.
– Install speed nut to sheet metal flange
-black arrow-
– Set both CD changer horizontal / vertical switches to 67.5_ (located on each side of CD changer)
CD changer to bracket, assembling
– Attach mounting bracket to CD changer using 6 supplied screws.
CD changer assembly, installing into vehicle
– Install CD bracket assembly into vehicle using 4 supplied screws.
– Connect harness to CD changer.
– Attach harness to clip mounted on CD changer bracket.
– Check CD changer operation.
– Reinstall left rear trim panel.
– Reinstall left rear seat back lock pin.

source