GROM AUX Adapter Installation Instructions

The GROM AUX adapter – an integration between an MP3 player and a factory installed car stereo. Equipped with the specific vehicle harness and standard RCA jack the GROM AUX interface will allow you to connect your MP3 player or iPod / iPhone to the car stereo system easily

Proper mounting location
Securely install the interface in a location that is free from heat, humidity, moving parts, or direct sunlight. Beware of hot airflow from your vehicle’s climate control system. We recommend securing the interface to a suitable location, free of sharp metal edges, using double-sided tape, Velcro, or wire ties.

Disclaimer
• This product is not affiliated with any of the OEM manufactures
• Modifying the radio may void any outstanding warranty.
• The purchase of this product carries with it no warranties, either expressed or implied.
• While every care has been taken to provide a quality product, we cannot guarantee that the GROM AUX adapter to function correctly if installation is not done according to the instructions in this guide. We also cannot guarantee that the GROM AUX adapter will function correctly with an MP3 player if the MP3 player is broken or damaged or not supported
• Keep your eyes on the road while driving!
• We are not liable for the misuse of this product. Misuse includes improper installation, damage to the board or radio while trying to install it, and the illegal use of the radio.

Preparation and adapter installation
1. Turn off car engine and remove key from ignition
2. If your radio uses a Security Code, make sure that you have the code before unplugging the radio.
3. Un-mount your radio from the dash in order to get access to the back side of the radio. Some vehicles require the special tools to remove the radio. Please consult your vehicle’s dealership or a local car audio professional if necessary.
4. Attach the car harness connector to the back of the stereo to the CD changer port. Be sure to make a firm connection but do not force it. Connect the other end to the interface.
5. WV/AUDI/SEAT/SKODA - there is a black single cable on the vehicle specific harness (3). You will need to attach it to the back bolt of the car stereo or to the stereo chassis
Remove the PVC from the end of the black wire (2)
(a) Connect the end of the black wire (2) to the metal part of the car stereo chassis. You can connect it under the bolt (3) if present
(b) Make sure that the solid contact is maintained between the striped black wire and the metal part of the car stereo body.

source