02-05 Audi A4 L4-18.L Intake Kit Installation Instructions

Step 1: Complete kit. Make sure you have all the components before you begin your installation
Step 2: Complete stock intake
Step 3: a. Remove two screws holding factory fresh air duct in place.
b. Pull fresh air duct out of vehicle and save for later use
Step 4: a. . Remove two screws holding top half of airbox in place.
b. Loosen clamp holding factory tube in place.
c. Unplug MAF Sensor.
Step 5: Remove top half of factory airbox.
Step 6: Remove clamp holding top breather filter on factory tube.
Step 7: Remove clamps holding second breather from top of factory tube. Save elbow for later use.
Step 8: Remove clamps holding third breather filter from top of factory tube. Plug can be disconnected for ease of removal.
Step 9: Loosen clamp holding fourth breather down from top of tube with slotted screwdriver.
Step 10: Loosen clamp at turbo and Last breather tube. Pull factory tube out of vehicle.
Step 11: Pull off front grill near Passenger side fog lamp
Step 12: Remove fog light from vehicle.
Step 13: Disconnect Air pump hose at pump.
Step 14: Remove fitting from air pump hose and install provided breather filter. Install filter onto air pump and replace fog lamp and grill.
Step 15: Remove MAF Sensor from top half of air box.

source