AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which allow to easily connect your ECU to our hi-tech data loggers: user needs only to install harness between the logger and the ECU. Once connected, the logger displays (and/or records, depending on the logger and on the ECU data stream) values like RPM, engine load, throttle position (TPS), air and water temperatures, battery voltage, speed, gear, lambda value (air/fuel ratio), analog channels..
All AIM loggers include – free of charge – Race Studio 2 software, a powerful tool to configure the system and analyze recorded data on your PC. Warning: once the ECU is connected to the logger, it is necessary to set it in the logger configuration in Race Studio 2 software. Select Manufacturer “Mazda” Model “MX5”.
Refer to Race Studio Configuration user manual for further information concerning the loggers configuration.
1 – Car Models
Denso ECU is installed as stock on the following car models:
• Mazda MX5 roadster
• Mazda MX5 roadster coupè
2 – CAN Communication Setup
Denso PCM (ECU) is equipped with a CAN communication protocol used to communicate parameters to a data logger.
Source
Friday, June 18, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment