Escort, Beltronics, and Valentine 1 Power Cords For Powered Mirrors

These cords will fit various models of the Whistler, Escort, Beltronics, AND the Valentine 1. Please check the initial installation chart below for your particular application. These are as reported back from prior customers. For more recent vehicle application guidelines and updates, Directions:
1) Pull the mirror around so that you can access the power plug in the back, or unplug the harness if it would seem to help.
2) Push the +12v pin connection (see chart above) into the back of the slot that is determined to the hot +12v on the mirror wiring harness.
3) Push the ground connection (see chart above) into back of the slot that is determined to the ground on the mirror wiring harness.
4) If you have a mirror that has a switched power source (standard mirrors typically do not), mount the detector within reach of the power cord. Turn on the detector, and turn on/off the ignition to check the power and connection quality. You should see your detector power up and back down with the ignition.
5) Once you have power to the detector, please use a cable-tie around the Invisicord and the factory wiring to help keep the connectors from coming free due to vibration or the detector suction mount giving way, which could damage the Invisicord leads going into the mirror.

Source