These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Pontiac G6 Grille Installation
1) UPPER GRILLE INSTALLATION
1.1) Remove the upper grilles. Each upper grille is held in place by 8 tabs. Using a playing card and a flat-head screwdriver, carefully pry the chrome molding away from the bumper in each of the 8 locations shown in Fig. 1 The inner grille is held in place by 4 tabs (1 on each side). Using the screwdriver and playing card, carefully pry these free from the bumper.
1.2) Remove radiator cover. To gain the access necessary to install the upper grilles, you will need to free the radiator cover that is held in place by four 10mm bolts and six pop-top fasteners (locations pictured in Fig. 2). Pop-top fasteners are removed by inserting a small flat head screw driver in the slot, prying the inner section up, and then pulling the fastener up.
Source
Sunday, June 20, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment