2007 Chevy/GMC Tahoe/Yukon 2" Front Leveling Kit Installation

Install Front Leveling Kit
1. Driver side coil-over
a. Scribe or paint coil-over with alignment mark for proper re-assembly.
b. Using spring compressors, carefully compress coil spring until coil spring is free from shock absorber.
c. Remove nut, upper plate, spring locator, and shock absorber from coil spring.
d. From CL220BAG: Install two kit dowel pins (3/ 16” x .875”) into kit spacer (lower)
e. Install kit spacer (lower) onto spring locator.
f. Install spring locator and kit spacer (lower) onto boot and coil spring.
g. Install upper plate onto kit spacer (lower). Align previously made marks.
WARNING
Compressed coil springs can expand violently causing serious personal injury. Before removing the coil springs, lower the axle housing as far as possible to allow the coil springs to expand. Use caution when using coil spring compressors.
h. Install shock absorber onto assembly with nut. Carefully remove spring compressors from coil spring and ensure marks are aligned.
i. Install kit spacer (upper) onto upper plate.
j. From CL220BAG: Install coil-over onto upper perch with three kit washers (10mm) and three kit nuts (10mm stover). TORQUE to specification.

source