Chrysler Easy-Out Roller Seat Base Installation

Chrysler’s Easy-Out Roller seat base attachments engage recessed floor strikers (supports). Two release handles are located at the rear of the seat base. Squeezing the handles and rotating the handles downward disengages the attachments and deploys the wheels. A lock indicator button pops up when the seat is unlocked.
Squeezing the handles and rotating the handles upward engages the attachments. The indicator button returns into the handle when the attachment mechanism is in the fully engaged position (seat base attachments are fully Squeeze and push down on handle to disengage seat (two handles per seat).

Tip seat back and roll out of vehicle. Roll seat out of vehicle. engaged with floor strikers).
See photos below and next page for Easy-Out Roller Seat Removal and Installation Instructions.

Easy-Out Roller Seat Removal Instructions
1. Caution! Disconnect seat wiring harnesses before removing seats (if applicable). See pages 35 through 38 for wiring harness and receptacle details and photos. Easy-Out photos are on previous page.
2. Squeeze the release handles located at the rear of the seat base and rotate downward. Rotate the handles down fully until the handles reach the locked (horizontal) position and the indicator buttons return into the handles (see Photo E on page 39).
Note: A lock indicator button pops up when the seat is unlocked (midpoint of handle rotation). The indicator buttons return into the handles when the handles are rotated fully down (seat base attachments are fully disengaged from floor strikers and wheels are deployed).

source