2006 Toyota Corolla Air Conditioning Unit Assy

HINT: Installation is in the reverse order of removal.
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM SST 07110-58060 (07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
2. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
a. Install SST to piping clamp. SST 09870-00015 HINT: Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label.
b. Push down SST and release the clamp lock. NOTE: Be careful not to deform the tube, when pushing SST.
c. Pull SST slightly and push the release lever, then remove the piping clamp with SST.
d. Remove the piping clamp from SST.
e. Disconnect the suction hose sub-assembly. NOTE:
● Do not use tools like screwdriver to remove the tube.
● Cap the open fittings immediately to keep moisture or dirt out of the system.
3. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY SST 09870-00015 HINT: Disconnect in the same way as the suction hose sub-assembly.
4. DISCONNECT HEATER INLET WATER HOSE
a. Using pliers, grip the claws of clip and slide the clip and disconnect the heater inlet water hose.
5. DISCONNECT HEATER OUTLET WATER HOSE HINT: Disconnect in the same way as the heater inlet water hose.
6. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY LOWER HINT: Refer to the instructions for removal of the instrument panel sub-assembly lower.

Source