07-Up Chevy Tahoe LED Upper Quarter Panel Light

Your new IPCW LED Upper Quarter Panel Lights are quality-made products that will work beautifully on your vehicle. Please refer to the pictures below for installation instructions.
Remove the screws in Figure A with a Phillips screwdriver. Untwist the sockets, then gently slide out the tail light.
After the tail light is removed. remove the screw in Figure B.
Remove the screw in Figure C to remove the Upper Quarter panel.
Gently slide out the stock Upper Quarter Panel.
Take the new IPCW LED Upper Quarter Panel Light out of the box.
Install the LED Upper Quarter Panel Light following Steps 2 to 4 in reverse order.
There will be 3 wires hanging from the back: (1) Black, (1) Red & (1) Blue with wire clamps.
Locate the factory socket on the vehicle that has the black, yellow, & light blue wires together.
Take the (1 ) Black wire of the LED light and clamp it to the black wire of this factory socket.

source