Hybrid Nissan N14 GTi-R intercooler kit Installation instruction

Please remove the Std intercooler ,top Std intercooler pipe , front bar ,front reinforcement prior install the top Hybrid intercooler pipe. (make sure all super clamps are loose for further adjustments.)
Enlarge the hole behind the driver side head light to clear the top pipe
Enlarge the hole behind the passenger side head light to clear the top pipe
Remove and replace the supplied bonnet hook bracket
Drill 2 holes 250mm apart from the center and install the intercooler bracket
Trim the bottom of the reinforcement
Install the intercooler and the bottom bracket u may need to bend the bracket for better fitment
Install the driver side intercooler pipe
Install the passenger intercooler pipe
Install the turbo hot pipe Rotate the radiator reservoir 90 degree for hot pipe passage .
Install driver side hybrid intercooler pipe with a 90 degree silicon hose.
Tighten all the hose clamps after all piping are installed.
Re-check all the piping, Hybrid silicon hose and clamps make sure they are all securely installed and trim the front bumper bar for perfect fitment.

Source