Thank you for purchasing the XS Engineering Power IC System for the Nissan Silvia & 180SX - S13. Utilizing state of the art design and manufacturing processes, XS Engineering has designed this Power IC System to complement the SR20’s inherent ability to operate at extreme boost pressure levels by allowing it to do so without penalty of increased intake air temperature. We strongly recommend that this kit be installed by experienced professionals only. This intercooler system includes piping for use with either the stock or stock replacement turbochargers only. You may have to modify the intercooler pipes if you are using an aftermarket turbocharger. Please take the time to read through and understand this manual fully before you proceed with the installation process.
Installation
(NOTE: These instructions are just general guidelines for the removal and reassembly of the factory bumper and bumper reinforcement assemblies. Please refer to the factory service manual for detailed step-by-step directions for the removal and reassembly of these components.)
1. Remove the front bumper cover.
2. Remove the bumper reinforcement (this will no longer be used).
3. Remove the stock intercooler system (if applicable).
4. Remove the factory battery and battery tray.
5. Install the new XS Engineering Power IC core using the supplied Left and Right Intercooler Brackets. Loosely fasten the brackets to the core using the M8 x 16 flanged bolts. Use the factory bumper reinforcement bolts to fasten the brackets to the chassis.
Source
Saturday, December 18, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment