350Z GT Aero Front Bumper Installation Manual

This product is meant to fit Nissan 350Z only. Please check the parts before mounting.
- Mounting Procedure
Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.
（Remove the side bracket from the OEM bumper. ）
(Remove the impact foam from the front of the bumper.）
Install the side bracket onto the GT bumper by reversing the steps used to remove it.
Install the GT bumper using the factory clips and screws to the original locations.
This completes the installation.
Note 1 ： This job is recommended for 2 people.
Note 2 ： Temporarily install the bumper to check fitment before painting.
350Z GT Wide Fender Kit
This product is meant to fit Nissan 350Z only. Please check the parts before mounting.
■ Mounting Procedure
Remove the factory fuel lid from the vehicle. Temporarily tape the fenders onto the body to get them in the correct positioning. Mark the mounting points so you are able to drill in the correct positions. rivets. Drill the holes and attach the rivets. Cover any raw metal with touch up paint or rust stop.
Installation is complete.
Note 1： This job is recommended for 2 people.
Note 2： Temporarily mount the fenders to check fitment before painting.
Note ３： Be sure to use a surface degreaser and sand the material before applying primer and paint.

Source