Parrot UNIKA for Alfa Romeo cars

Parrot UNIKA is a universal interface that allows you to control the Parrot MKi9000/MKi9100/ MKi9200 directly with the OEM steering wheel commands. Parrot UNIKA can work with car protocols such as CAN, KBUS or resistive systems. Before installing the Unika, make sure you have the latest software update on your Parrot MKi. If you have a Parrot MKi9100, make sure you also have the 3.1 display version. To do so, select Settings > Advanced settings > Information.
Compatibility Car models
Alfa Romeo 147 : > 2004
Alfa Romeo 156 : > 2004
The wires corresponding to the resistive protocol must be connected correctly to your car stereo’s. It is important to follow the wiring diagram for your vehicle.
Checking the wiring
Once your UNIKA interface has been fitted, the LED should light up green and should turn amber while pressing a button on your steering wheel. If the LED does not light up, check the power supply connections. If the LED is red or blinks red, check the connections.
Warning : Once the installation is complete, turn the ignition off until the UNIKA LED switches off.
Reset procedure
In case of problem or if you have installed the UNIKA interface in another car, reset the UNIKA by holding down the Reset button until the LED turns off (if the vehicle is based on a CAN Bus / KBus protocol) or blinks red (resistive protocol). You can then release the reset button.

Source