2003-06 Honda/Acura CD Changer Interface

The AXHA2 can either provide up to 2 auxiliary audio inputs to your Honda radio for use with any device that has RCA line level outputs, or provides 1 auxiliary audio input and allows interfacing an aftermarket CD changer. AUX 1 is the 8-pin DIN to RCA cable which plugs into the 8-pin DIN port on the AXHA2 interface. AUX 2 is the set of RCAs that are wired directly to the AXHA2. These audio inputs are perfectly suited for Multimedia devices such as VCRs, DVDs, game systems, or TV tuners/ Portable music players such as MP3, MD and CD players can utilize these inputs as well.
Function Overview: The AXHA2 is compatible with the select 2003 to 2006 Honda CD chnager control head units with 14-pin connector. If you discover a radio that is or is not compatible please contact Scosche Industries at the number below. NOTE: As vehicle manufacturers continually introduce updated radio models, there may be instances where the interface is not compatible. Please contact Technical Support if you experience any problems. Have all radio model numbers, vehicle information and symptoms ready when you call.
Compatible Radios: The AXHA2 connects to the 14-pin connector on the back of the factory head unit.
Compatible CD Changers: The AXHA2 allows an aftermarket 6 or 10 disc CD changer to function exactly as a factory CD changer would. For Sanyo and Audiovox changers, use the 8-pin port on the side of the interface marked "For Sanyo/Audiovox CD Changers or AUX 1 input". For Alpine changers, use the directly wired 8-pin connector marked "For Alpine CD Changer Connection Only". To function properly with a 10 disc changer the magazine must be fully loaded with a disc in each tray. Please refer to vehicle’s Owner’s Manual for specific radio and changer operation.
Special Instructions: To activate this input you must disconnect the two ends of the BROWN loop and connect the two ends of the WHITE wire loop. Attach the GRAY wire from the AXHA2 to a toggle switch that will ground the GRAY wire when selected. When the GRAY wire is grounded the CD changer will automatically pause and audio from the AUX 2 input will be heard. When the GRAY wire is ungrounded, CD changer operation wil resume where it left off.

Source