2004 Toyota Camry L4-2.4L Front Brake System

This document cover the installation of front brake for Toyota Camry:
OVERHAUL HINT: Overhaul the RH side by the same procedures with LH side.
1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID NOTICE: Wash off the brake fluid immediately if it comes into contact with a painted surface.
3. DISCONNECT FRONT FLEXIBLE HOSE
a. Remove the union bolt and a gasket from the disc brake cylinder, then disconnect the flexible hose from the disc brake cylinder.
4. REMOVE DISC BRAKE CYLINDER ASSY FR LH
a. Remove the 2 bolts and disc brake cylinder.
5. REMOVE DISC BRAKE PAD KIT FRONT (PAD ONLY)
a. Remove the 2 brake pads with anti-squeal shim.
6. REMOVE ANTI SQUEAL SHIM KIT FRONT
a. Remove the 2 anti-squeal shims from each of 2 brake pads.
b. Using a screwdriver, remove the wear indicator from each of 2 brake pads.
7. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE
a. Remove the upper side front disc brake pad support plate.
8. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE
a. Remove the bottom side front disc brake pad support plate.
9. REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN
a. Remove the 2 cylinder slide pins from the disc brake cylinder mounting.
10. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH
a. Remove the cylinder slide bush from the cylinder slide pin.
11. REMOVE FRONT DISC BRAKE BUSH DUST BOOT
a. Remove the 2 bush dust boots from the disc brake cylinder mounting.
12. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING LH
a. Remove the 2 bolts and disc brake cylinder mounting LH.

Source