Parrot UNIKA is a universal interface that allows you to control the Parrot MKi9000/MKi9100/MKi9200 directly with the OEM steering wheel commands. Parrot UNIKA can work with car protocols such as CAN, KBUS or resistive systems.
Installation of the Parrot MKi
We recommend you to install the Parrot MKi before installing the UNIKA. Make sure the installation is correctly performed by checking if the Good bye message is displayed when you turn off the ignition.
Refer to the documentation of your Parrot MKi for more information
Selecting the protocol
Use the DIP switches located on one side of the UNIKA to select the protocol (resistive or CAN Bus / KBus) on which the vehicle is based. Warning: Make sure the UNIKA is not powered before selecting the protocol.
The power supply for the UNIKA interface is taken from the power cable of the Parrot MKi. It is important to follow the color code of the power cable wires: the red wire of the kit’s cable corresponds to the permanent 12V supply; the orange wire corresponds to the ignition 12V ; the black wire is for ground ; the yellow wire corresponds to the Parrot mute output. Warning : Connect the ignition to the Parrot car kit if the vehicle is based on a resistive or a K-Bus protocol. Don’t connect the ignition if the vehicle is based on a CAN protocol.
source
Saturday, May 8, 2010
Parrot UNIKA for Chrysler Cars
3:52 AM by onesecond
·
Labels: bus protocol, cable wires, can protocol, car kit, Chrysler, chrysler cars, good bye message, kbus, mki, orange wire, parrot, PDF Download, power cable, power supply, protocols, s cable, steering wheel, unika, universal interface, wheel
Labels: bus protocol, cable wires, can protocol, car kit, Chrysler, chrysler cars, good bye message, kbus, mki, orange wire, parrot, PDF Download, power cable, power supply, protocols, s cable, steering wheel, unika, universal interface, wheel
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment