94-96 Cadillac DeVille Universal Taillight Kit Installation

Any part that is modified and/or painted are non returnable.
1. Install steel weld-on light fillers (if applicable)
Measure and trace the housing shape to the area you plan to install them. Cut out the opening of the pattern using a plasma cutter, cutting wheel, or equivalent.
2. Insert the taillight bucket into opening and position as desired. Make sure to place the bucket as level as possible so the light reflects straight back from the vehicle. You can adjust the depth of the taillight bucket based on your preference. Stitch weld the bucket into place.
3. Repeat process for the other side.
4. Cut and grind any excess material from buckets until it fits flush with the vehicle’s body.
5. Install the mounting clips to the top of each bucket by lining them up with the holes located in the buckets.
6. Pre-install the taillight assemblies by inserting the assembly and bezel first, and then the screws.
7. Using body work tools, fill any seams left on the buckets and prep for paint. Paint vehicle. Re-install the taillight assemblies

source