2007 Porsche 911 GT3 RS

With effect from October, Dr. Ing. h.c. F. Porsche AG of Stuttgart, Germany, will be launching the new 911 GT3 RS on the European market. This purist variant of the GT3 is particularly suited for use on the track. The GT3 RS is distinguished by its performance capability and the unadulterated driving experience enjoyed with a racing car, but also meets all requirements for road-legal sports cars.

The exceptionally meaty engine boasts a displacement of 3.6 liters to generate 305 kW (415 bhp) at 7,600 rpm. Maximum revs are reached at 8,400 rpm. The power output per liter of engine capacity is 115.3 bhp. These figures correspond to the present GT3. But the RS puts in an even better performance. Thanks to a close-ratio six-speed transmission with a single-mass flywheel and the 20 kg lower vehicle weight, the engine revs up even more freely, thus enabling the 911 GT3 to sprint from zero to 100 km per hour in 4.2 seconds. That's one tenth of a second faster than the GT3. It takes just 13.3 seconds to hit to 200 km per hour. Maximum speed is 310 km per hour.

The reference "RS" will quicken the pulse of Porsche connoisseurs. Models such as the legendary Carrera RS 2.7 of 1972 and the type 964 911 RS (1991) were also sports cars that stood out on account of an extreme degree of maneuverability and handling. That tradition is continued with the new 911 GT3 RS. In common with its predecessors, it provides a basic and pre-approval model for use in a range of racing series.

One characteristic of the new "RS" is the body, which is 44 mm wider at the rear (a legacy from the Carrera 4 models) by comparison with the 911 GT3. The muscular-looking rear end conceals a wider track that not only improves directional stability but also increases the transverse acceleration potential of this two-seater coupe.

Despite its specialized body, the "RS" is 20 kg lighter than the GT3, weighing in at just 1375 kg. This weight-saving was achieved by the use, amongst other solutions, of an adjustable carbon fiber wing, the use of a plastic rear lid and a lightweight plastic rear window. The corresponding weight-saving is 4.5 kg/kW.