BMW Bluetooth Kit Installation Instructions

The BMW Bluetooth Kit Installation Instructions for BMW 3 Series / M3 Coupe, Sedan, Convertible03/02-MY06 (E46) The installation time for this kit is approximately 1.25 hour These instructions were developed especially for BMW vehicles and are not to be compared to any existing instructions for vehicles other than BMW. No methods other than those specified in this document are to be used to install the BMW Universal BluetoothTM Hands-Free Kit
PROCEDURE: To install and connect the BMW Universal BluetoothTM Hands-Free System Disconnect Battery prior to starting the installation.
A. BluetoothTM Antenna & Pairing Button Installation
1. Remove the rear ashtray and disconnect the illumination light (2).
2. Remove two Phillips screws (3) and remove the rear ashtray assembly (1).
3. Remove the center console storage tray (2), refer to RA 51 16 200. The center console will need to be removed in order to install the pairing button later in the procedure.
4. Locate the black FAKRA connector (1), located below the rear ashtray assembly.
5. Secure the BluetoothTM antenna (D), P/N 84 50 6 928 461, to the antenna-mounting bracket (C), P/N 84 13 6 912 160, using two M5 hex nuts (J), P/N 63 21 371 401.
6. Connect the black FAKRA connector (1) to the antenna (D).
7. Place the mounting bracket with antenna (1) on top of the mounting points.
8. In order to install the Pairing Button, P/N 84 13 0 302 715, an opening must be cut into the rear of the center console. The area to be cut out can be marked using the template P/N 84 11 0 304 482
9. Cut out the template as indicated and fold one side of the template.

Source