In cars with a BMW Business CD radio up to 09/01 and in all other cars up to 03/01, the aerial booster must be replaced by an aerial booster for cars from 09/01 or 03/01 onwards, respectively. This aerial booster is not included in the retrofit kit and must be ordered separately (see EPC for part number and documentation).
The left boot wheel arch trim must be replaced in cars without a CD changer. This boot wheel arch trim is not included in the retrofit kit and must be ordered separately (see EPC for part number and documentation). The on-board monitor B and the support E are not included in the retrofit kit since there are different versions. It must be ordered separately (see EPC for part number and documentation). In cars without aerial Diversity, it must be retrofitted using individual parts (see EPC for part number and documentation).
To install and connect the retrofit wiring harness Route retrofit wiring harness A from the side skirt (1) as follows along the standard wiring harness: - Branches A1 – A7 to the centre console - Branches A8 – A13 into the boot on the left Route branch A1 along the standard wiring harness to the instrument cluster and use miniature connector R to connect it to the black/ white cable of PIN 8 of plug X11175. Connect branch A2 to radio plug X18126. Wrap the plug connector in protective strip U.
Source
Sunday, July 25, 2010
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment