GM Service Manuals SIR Disabling and Enabling Zone 2

Disabling Procedure
Important: Refer to SIR Disabling and Enabling Zones on page 2-81 before disabling the SIR system.
1. Turn the steering wheel until the vehicle’s wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
Important: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.

06 Chevrolet Aveo/Wave Cruise Control Installation Instructions

INSTALLATION
1) Remove knee panel under steering column, then remove (6) 10mm screws to release steel panel.
2) Remove lower steering column cover and driver side kick panel.
3) Connect the Red Cruise Harness Wire to Pink 12v Ignition Vehicle Wire behind fuse.
4) Connect the Black Cruise Harness Wire to Black Wire/Position 87 of 4

Check Engine Lights: Myths and Facts

You’re driving along and suddenly your Check Engine Light comes on. What does it mean? Check Engine Light, Check Engine Soon Light, Service Engine Soon Light, Engine Light, Engine Management Light, whatever you want to call it, simply means that your vehicle’s computer system has detected a problem. Depending on the year, make, and model, it may be related to the engine, the transmission, even the brakes and suspension. There are literally hundreds of reasons a Check Engine Light may appear. The following questions and answers discussion will clarify the truth about Check Engine Lights.

Malfunction Indicator Lamp/Check Engine Light

If this indicator comes on while driving, there is a problem with your engine or its emission control systems. Even though you may feel no difference in your car's performance, it can reduce your fuel economy and cause your car to put out excessive emissions. Continued operation may cause serious engine damage.

Toyota 4Runner, Highlander Trailer Wire Harness Service Bulletin

Beginning in 2000, the accessory trailer wire harness supplier was changed and a new design was adopted which incorporated in–line fuses in the tow wire harness in addition to the vehicle fuse. This bulletin identifies the fuse location to supplement dealer diagnostics troubleshooting. In the future please reference the accessory trailer wire harness Owner’s Guide for the vehicle specific diagnostic procedures. As a general note please place the towing wire harness Owner’s Guide in glove box after every DIO installation.

Diagnostic for Power Steering Inoperative/Steering Wheel Hard to Turn

Recommendation/Instructions
The following diagnostics might be helpful if the vehicle exhibits the conditlon(s) described above. Use the appropriate recommendation based on what symptom has occurred.

1998 Honda Civic EX Fuses & Circuit Breakers

When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
UNDER-DASH FUSE/RELAY BOX NOTE: Under-dash fuse/relay box is located under driver's side of instrument panel.

1998 Subaru Legacy L Sedan Lighting and Horns Parking Lamp Electric Diagram

1998 Subaru Legacy L Sedan AWD F4-2.2L SOHC Vehicle Level Diagrams Electrical Diagrams Lighting and Horns Parking Lamp
Fuse/Relay Locations: For fuse and/or relay locations refer to Starting and Charging / Power and Ground Distribution: See: Power and Ground Distribution Ground Locations: For ground locations refer to Vehicle / Locations / Harness: See: Locations\Grounds Connector Locations: For connector locations refer to Vehicle / Locations / Connectors: See: Locations\Connectors Component Locations: For component locations refer to Vehicle / Locations / Harness: See: Locations\Harness

03 Pilot EX Outside Temperature Indicator Logic

If you’re getting complaints from owners of ’03 Pilot EXs that the outside temperature indicator doesn’t read accurately, you may just need to explain how the logic works. The temperature sensor for the indicator is mounted behind the front bumper. Because of this, the temperature reading can be affected by heat reflection from the road, engine heat, and even exhaust fro surrounding traffic. To prevent bogus readings, the display uses a specific logic. Here’s how it works.

New Beetle Relay and fuse arrangement

Relay arrangements on the relay panel - Dual Horn Relay (53) 1- Load Reduction Relay (213, 100, 18) 2 - open 3 - Fuel Pump (FP) Relay (409) 4 - Wiper/Washer Intermittent Relay (377), V Wiper/Washer Intermittent Relay (377), VI Fuse placements on the relay panel A- Fuse for power windows (red connector) B- open C - Fuse for heated power seats (black connector)

Front Connected 63 Fuse Fitting

Method of Cabling Front connected fuse fittings
1. Remove red nylon insulating shroud to release cable sleeve.
2. Remove cable sleeve.
3. Fit cable sleeve over cable.
4. Fit conductor into fuse base terminal and tighten cable clamping screw to secure. If flexible cables are used, their relatively fine strands may be given increased protection by the use of thin wall copper ferrules over the conductor.
The following should be taken into account:

1990 BMW 750iL (E32/2) Fuse and Fusible Link Locations

Layout Of Rear Power Distribution Box Fuse Assignments : Fuse Assignments: 1 To 4 Door Lock – Fuel Injector Fuel Injector – Ignition Coil Ignition Coil – Park Brake Park Heating – Seat Lumber Seat Lumber – Trunk Lock Underhood – Wiper Component Index

1999 Mercedes Benz Truck ML 430 Air Injection Pump Operation

M33 AIR pump Engine 104, 111, 112, 113, 119, 137,166: When actuating, the voltage supply of the engine is performed via the air injection relay. Engine 104, 120: When actuating, the electromagnetic clutch air pump is actuated by force. Work instructions NOTE: Trim panel of cylinder head cover or air cleaner take off. Bolt (5) unscrew Refer to Air Pump NOTE: Pay attention to ground cable. 5/1 Air hose detach. M33