1. Vehicle Disassembly. (a) Remove the negative battery cable. (Fig. 1-1) (1) Protect the fender before starting. (2) Be careful not to touch the positive terminal. (b) Remove the air damper wire terminal from the bottom of the glove box. (Fig. 1-2) (1) Remove the clip securing the air damper wire terminal. (c) Remove the glove box. (Fig. 1-3) (1) Remove two stoppers securing the bottom of the glove box. (d) Remove the glove box inner cover. (Fig. 1-4) (1) Remove seven screws securing the cover. (2) Disconnect one connector. (e) Remove the passenger side panel. (Fig. 1-5) (1) Remove two clips securing the cover.
Showing posts with label terminal c. Show all posts
Showing posts with label terminal c. Show all posts
Sunday, June 6, 2010
2006 Toyota Highlander Hybrid TVIP V2 (GBS Add On) Installation
10:50 PM by onesecond
·
0
comments
Labels: adjustment screw, air damper, correct slot, fender, glove box, instrument panel, metal edge, metal reinforcement, mounting bracket, negative battery cable, screws, terminal c, Toyota, toyota highlander, toyota highlander hybrid, wire terminal
Labels: adjustment screw, air damper, correct slot, fender, glove box, instrument panel, metal edge, metal reinforcement, mounting bracket, negative battery cable, screws, terminal c, Toyota, toyota highlander, toyota highlander hybrid, wire terminal
Monday, May 17, 2010
Front Connected 63 Fuse Fitting
12:47 AM by onesecond
·
0
comments
Labels: conductor, conductors, copper, diameter, ferrule, ferrules, flexible cables, fuse, groove, PDF Download, red nylon, screw, strands, terminal c, thin wall, wall thickness
Labels: conductor, conductors, copper, diameter, ferrule, ferrules, flexible cables, fuse, groove, PDF Download, red nylon, screw, strands, terminal c, thin wall, wall thickness
Method of Cabling Front connected fuse fittings
1. Remove red nylon insulating shroud to release cable sleeve.
2. Remove cable sleeve.
3. Fit cable sleeve over cable.
4. Fit conductor into fuse base terminal and tighten cable clamping screw to secure. If flexible cables are used, their relatively fine strands may be given increased protection by the use of thin wall copper ferrules over the conductor.
The following should be taken into account:
1. Remove red nylon insulating shroud to release cable sleeve.
2. Remove cable sleeve.
3. Fit cable sleeve over cable.
4. Fit conductor into fuse base terminal and tighten cable clamping screw to secure. If flexible cables are used, their relatively fine strands may be given increased protection by the use of thin wall copper ferrules over the conductor.
The following should be taken into account:
Subscribe to:
Posts (Atom)
