2006 Toyota Highlander Hybrid TVIP V2 (GBS Add On) Installation

1. Vehicle Disassembly. (a) Remove the negative battery cable. (Fig. 1-1) (1) Protect the fender before starting. (2) Be careful not to touch the positive terminal. (b) Remove the air damper wire terminal from the bottom of the glove box. (Fig. 1-2) (1) Remove the clip securing the air damper wire terminal. (c) Remove the glove box. (Fig. 1-3) (1) Remove two stoppers securing the bottom of the glove box. (d) Remove the glove box inner cover. (Fig. 1-4) (1) Remove seven screws securing the cover. (2) Disconnect one connector. (e) Remove the passenger side panel. (Fig. 1-5) (1) Remove two clips securing the cover.

2008 Toyota Highlander EC Rearview Mirror

Steps for EC Rearview Mirror installation: 1. Remove Battery Cable. (a) Protect fender before starting. (b) Do not touch the positive terminal with any tool when removing cable. (c) Remove the negative battery cable. (Fig. 1-1) 2. Vehicle Disassembly. (a) Remove the OE mirror. (1) Disengage the two claws and remove the mirror cover from the mirror base. (Fig. 2-1) (2) Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it. (Fig. 2-1) (b) Using panel removal tool remove overhead console from headliner. (Fig. 2-2) (1) Disconnect any connectors connected to the overhead console. 3. Install T-taps. (a) Locate the disconnected 22-pin overhead console connector. (Fig. 3-1) (b) Peel back or cut approximately one inch of the wire cover. (Fig. 3-2) (c)