In-Vehicle Mounting Solutions Docking Stations Install Services

First Mobile Technologies’ nationwide installation service enables us to install your solution whenever and wherever you need it. With the experience of more than 50,000 installations, First Mobile Technologies has developed a level of process and installation expertise that is unmatched. In fact, we are the only mobile technology company that offers a comprehensive range of services.

Land Rover Operation Manual

The Land-Rover is equipped with a transfer box giving a secondary series of low gear ratios for heavy work. You are advised to consult “Gear Changing Instructions” for full details of the operation of this transfer box.
LOCKING
To protect your Land-Rover against theft, always remove the ignition key when parking. As an additional precaution the distributor rotor arm may also be removed or the petrol tap on the sediment bowl turned “OFF.”
MAINTENANCE
In order to obtain maximum service and dependability from your Land-Rover, maintenance items listed in this manual should receive regular attention. They are few in number and quite straightforward and will amply repay the small amount of time which needs to be devoted to them.

2008 Toyota Highlander EC Rearview Mirror

Steps for EC Rearview Mirror installation: 1. Remove Battery Cable. (a) Protect fender before starting. (b) Do not touch the positive terminal with any tool when removing cable. (c) Remove the negative battery cable. (Fig. 1-1) 2. Vehicle Disassembly. (a) Remove the OE mirror. (1) Disengage the two claws and remove the mirror cover from the mirror base. (Fig. 2-1) (2) Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it. (Fig. 2-1) (b) Using panel removal tool remove overhead console from headliner. (Fig. 2-2) (1) Disconnect any connectors connected to the overhead console. 3. Install T-taps. (a) Locate the disconnected 22-pin overhead console connector. (Fig. 3-1) (b) Peel back or cut approximately one inch of the wire cover. (Fig. 3-2) (c)

BMW 3 E93 Convertible Comfort Module Installation

The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.