2001-2002 Chevrolet/GMC 4X4 HD / 3/4 Ton Track Bar Kit PN. 71200

1. Working on one side of the vehicle at a time, raise the rear tire off the ground, place a jack stand on the flat part of the frame ahead of the rear spring and remove the wheel.
2. Support the axle with your floor jack and remove the U-bolts from the axle.
3. Carefully lower the axle away from the spring pack until there is sufficient clearance to insert the track bar adapter (Driver Side 90-1587 / Passenger Side 90-1588) between the spacer block and the axle mount pad as shown in Illustration 1.

2007 Freelander 2 SE Rear Screen Connectivity Aftermarket Install Guide

I have just finished fitting the rear screen connectivity system to my car. I was going to do a photo album of the install, unfortunately the camera died after the second photo. Instead I have used pics from the installation instructions and workshop manual to help illustrate.
Typical Land Rover, the instructions that came with the kit where pictorial only, and not as clear as they could have been (in my humble opinion). I hope this installation guide will be a lot easier to follow and hopefully you won’t have the few problems I encountered.

Land Rover Operation Manual

The Land-Rover is equipped with a transfer box giving a secondary series of low gear ratios for heavy work. You are advised to consult “Gear Changing Instructions” for full details of the operation of this transfer box.
LOCKING
To protect your Land-Rover against theft, always remove the ignition key when parking. As an additional precaution the distributor rotor arm may also be removed or the petrol tap on the sediment bowl turned “OFF.”
MAINTENANCE
In order to obtain maximum service and dependability from your Land-Rover, maintenance items listed in this manual should receive regular attention. They are few in number and quite straightforward and will amply repay the small amount of time which needs to be devoted to them.

1993 Taurus/Sable Bumpers Removal and Installation

Bumpers Refer to the following illustrations when performing Removal and Installation procedures on the front and rear bumper assemblies. CAUTION: Never apply excessive heat to bumper surface. Heat could cause distortion of the bumper. CAUTION: When collecting exhaust fumes in service area, never attach a metal collector to the exhaust tail pipe because the heat could damage the bumper.

2001 Honda Civic AC Kit Installation Instructions

The A/C kit and instructions for the 2001 Civic are all new. Follow these instructions carefully. Use only HFC-134a in this system; do not use CFC 12 (Freon); do not install parts designed for use in a CFC system. Use a charging station. A/C charging stations and refrigerant recovery/recycling stations minimize the release of CFCs and HFCs to the atmosphere. Use them for all A/C charging and service work according to the manufacturers’ instructions. Do not overcharge. This system requires only the amount of HFC-134a refrigerant shown below. If you overcharge the system, the engine and the A/C will malfunction.