2008 Toyota Highlander EC Rearview Mirror

Steps for EC Rearview Mirror installation: 1. Remove Battery Cable. (a) Protect fender before starting. (b) Do not touch the positive terminal with any tool when removing cable. (c) Remove the negative battery cable. (Fig. 1-1) 2. Vehicle Disassembly. (a) Remove the OE mirror. (1) Disengage the two claws and remove the mirror cover from the mirror base. (Fig. 2-1) (2) Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it. (Fig. 2-1) (b) Using panel removal tool remove overhead console from headliner. (Fig. 2-2) (1) Disconnect any connectors connected to the overhead console. 3. Install T-taps. (a) Locate the disconnected 22-pin overhead console connector. (Fig. 3-1) (b) Peel back or cut approximately one inch of the wire cover. (Fig. 3-2) (c)

2003 Subaru Outback Wiper & Washer Systems

2003 ACCESSORIES & EQUIPMENT Wiper & Washer Systems - Baja, Legacy & Outback REAR WIPER ARM
Removal 1. Raise wiper arm cover (A). 2. Loosen nut to remove wiper arm.
INSTALLATION 1. Install in the reverse order of removal. 2. Operate rear wiper once. 3. Align blade to rear defogger heat wire (A).
Tightening torque: Refer to FRONT WIPER , COMPONENT, General Description.

1988 Mazda Truck B Series Truck Timing Belt Removal and Installation

Guide for 1988 Mazda Truck B Series Truck L4-2184cc 2.2L 2200 Vehicle Level Engine, Cooling and Exhaust Engine Timing Belt Service and Repair Timing Belt Removal and Installation
1. Align the timing mark on the timing belt pulley and camshaft pulley with the marks.
2. Remove all the spark plugs.
NOTE: This is to prevent compression while rotating the timing belt.
3. This procedure must be used to install the timing belt.