ASSEMBLY Prior to installation, it is recommended to position the engine at your desired timing.
1. Install the distributor assembly using the four supplied socket head cap screws and washers.
2. Install the camshaft pulley with the supplied cam adapter, washer and 12-point bolt. Note that the threads are reversed. Coat the threads of the bolt with 30-weight motor oil or ARP moly lube. Torque it to 90 lb-ft with motor oil or 70 lb-ft with the ARP lube. Loop the belt over the timing belt pulley.
Showing posts with label timing belt pulley. Show all posts
Showing posts with label timing belt pulley. Show all posts
Wednesday, February 2, 2011
MSD Pro-Billet Front Drive Distributor Chevrolet Small Block, PN 8510 - Big Block, PN 8520
2:34 PM by onesecond
·
0
comments
Labels: assembly, Chevrolet, engine, firing order, head assembly, head cap, socket head cap screws, timing belt pulley
Labels: assembly, Chevrolet, engine, firing order, head assembly, head cap, socket head cap screws, timing belt pulley
Thursday, May 27, 2010
1988 Mazda Truck B Series Truck Timing Belt Removal and Installation
11:17 PM by onesecond
·
0
comments
Labels: arrow, bolt, camshaft, caution, crankshaft, crankshaft pulley, mazda, mazda truck, spark plugs, tension, timing belt pulley, timing belt tensioner
Labels: arrow, bolt, camshaft, caution, crankshaft, crankshaft pulley, mazda, mazda truck, spark plugs, tension, timing belt pulley, timing belt tensioner
Guide for 1988 Mazda Truck B Series Truck L4-2184cc 2.2L 2200 Vehicle Level Engine, Cooling and Exhaust Engine Timing Belt Service and Repair Timing Belt Removal and Installation
1. Align the timing mark on the timing belt pulley and camshaft pulley with the marks.
2. Remove all the spark plugs.
NOTE: This is to prevent compression while rotating the timing belt.
3. This procedure must be used to install the timing belt.
1. Align the timing mark on the timing belt pulley and camshaft pulley with the marks.
2. Remove all the spark plugs.
NOTE: This is to prevent compression while rotating the timing belt.
3. This procedure must be used to install the timing belt.
Subscribe to:
Posts (Atom)
