Nissan Titan King Cab Vehicle Specific Subwoofer Enclosure

The enclosure mounts under rear seat firing down, in Nissan Titan King/Crew Cab trucks.
TOOLS REQUIRED FOR INSTALLATION: Powered Screwdriver 6" Bit Holder Extension Socket Wrench
INSTALLATION: Follow the steps below
1. Slide front seats to full forward position. This will give you more room to work with.

Nissan Patrol Diesel System Case Study

A BDS Unit is a solid state device that produces a specific engineered frequency that can change the structure of diesel fuel to produce more complete combustion of the fuel. This nanotechnology is a completely new approach to fuel management. The transfer of the engineered frequency from the BDS to the fuel line begins to produce fuel and emissions

SR20 Solid Pivot Installation Manual

In order to make cam clearance maintenance-free, and achieve operation sound reduction, hydraulic lash adjuster is adopted to SR20 engine. However, when aiming at high rotation and a high output by engine modification, it is important

Long Tube Header Installation For Chevrolet Camaro 6.2L V8 PN 17249

This Borla Performance Stainless Steel Long Tube Header System (Part Number 17249) has been designed for the Chevrolet Camaro equipped with a 6.2L V-8 engine with an automatic or manual transmission.
Original Manifold System Removal

Retrofit Hydraulic Roller Lifter Installation Instructions

Thank you for choosing Gaterman Products hydraulic roller lifters. These lifters are engineered and manufactured to provide optimum performance and reliability. In order to take full advantage of the product, proper installation is required. Please follow the instructions below to insure complete satisfaction.

MSD Billet Crank Trigger Distributors PN 84697

A Crank Trigger must be used with this distributor. An MSD Billet Hold-Down Clamp, PN 8110, is recommended.
REMOVING THE DISTRIBUTOR
1. Remove the existing distributor cap without disconnecting any of the spark plug wires.
2. With the cap off, rotate the engine or until the rotor is aimed at a fixed point on the engine or firewall. Note this

MSD Pro-Billet Front Drive Distributor Chevrolet Small Block, PN 8510 - Big Block, PN 8520

ASSEMBLY Prior to installation, it is recommended to position the engine at your desired timing.
1. Install the distributor assembly using the four supplied socket head cap screws and washers.
2. Install the camshaft pulley with the supplied cam adapter, washer and 12-point bolt. Note that the threads are reversed. Coat the threads of the bolt with 30-weight motor oil or ARP moly lube. Torque it to 90 lb-ft with motor oil or 70 lb-ft with the ARP lube. Loop the belt over the timing belt pulley.

Vertex Magneto Instructions

1. Rotation of original distributor and magneto should be the same. This may be checked by observing the distributor rotor while cranking the engine with the starter and comparing observed rotation with the arrow on the magneto cap.
2. Wire position numbers on the Vertex cap indicate sequence of firing of the magneto. These are not to be interpreted as the firing order of the engine. Be sure to examine the Vertex cap closely when installing ignition wires in order to maintain proper engine firing order.

2004-2006 Chevrolet/GMC LLY/LBZ Duramax Turbo Kit BD Supermax Turbocharger

Pre-Installation
A turbocharger is driven solely on exhaust energy. Therefore, if the vehicles current exhaust manifold is cracked or is leaking, it is recommend that new exhaust gaskets and a heavy-duty exhaust manifold be used.
Installation should occur on a cold vehicle, as turbo and exhaust components become very hot with use.