REMOVAL OF ORIGINAL SPLASH PAN Raise and safely support the vehicle on jack stands or on ramps. Locate and remove the two 12mm bolts at the rear of the factory splash pan. Locate and remove the two 10mm screws from the left and right side of the factory splash pan. These are located up inside the fender. Locate and remove the three remaining 12mm bolts from the front of the factory splash pan. The splash pan has retaining tabs around the three bolt holes from the last step and will require some downward force to remove the splash pan from the vehicle
Showing posts with label subaru outback. Show all posts
Showing posts with label subaru outback. Show all posts
Monday, June 7, 2010
2001-2004 Subaru Outback Skid Plate Installation Instructions
9:25 PM by onesecond
·
0
comments
Labels: bolt holes, bolts, downward force, fender, ramps, screws, skid plate, splash pan, Subaru, subaru outback, tabs, washers
Labels: bolt holes, bolts, downward force, fender, ramps, screws, skid plate, splash pan, Subaru, subaru outback, tabs, washers
Sunday, May 30, 2010
2003 Subaru Outback Wiper & Washer Systems
11:58 PM by onesecond
·
0
comments
Labels: arrow, blade, bolts, figure source, general description, legacy outback, motor assembly, Subaru, subaru outback, tightening torque, torque, washer systems, wiper motor
Labels: arrow, blade, bolts, figure source, general description, legacy outback, motor assembly, Subaru, subaru outback, tightening torque, torque, washer systems, wiper motor
2003 ACCESSORIES & EQUIPMENT Wiper & Washer Systems - Baja, Legacy & Outback REAR WIPER ARM
Removal 1. Raise wiper arm cover (A). 2. Loosen nut to remove wiper arm.
INSTALLATION 1. Install in the reverse order of removal. 2. Operate rear wiper once. 3. Align blade to rear defogger heat wire (A).
Tightening torque: Refer to FRONT WIPER , COMPONENT, General Description.
Removal 1. Raise wiper arm cover (A). 2. Loosen nut to remove wiper arm.
INSTALLATION 1. Install in the reverse order of removal. 2. Operate rear wiper once. 3. Align blade to rear defogger heat wire (A).
Tightening torque: Refer to FRONT WIPER , COMPONENT, General Description.
Subscribe to:
Posts (Atom)
