Gentex Mirror Installation Instructions

Instructions for Universal Harness
These instructions have been prepared to provide you with details necessary for complete installation of the Gentex Aut o Dimming Mirror, Gentex Auto Dimming Compass/Temperature Mirror, or Gentex Auto Dimming/Compass/Temperature Mirror with Map Lights. Be sure to read all instructions prior to beginning the installation. Follow all the safety guidelines outlined in this instruction book as well as those set forth by industry and government.
This Gentex Rearview Mirror Universal Harness is designed for use in applications where a custom harness is not available for your vehicle.
PREPARATION FOR ROUTING THE HARNESS (Inside the Driver's Side Area)
Remove the "A" pillar (windshield post) trim molding, upper windshield trim molding (if applicable), and kick panel trim.
INSTALLATION PRECAUTIONS/NOTES:
" Do not use excessive force when removing OE mirror from windshield. The windshield button may separate from the windshield or the windshield may break.
" Do not use excessive force if removal of OE mirror button is necessary.
" Do not route wiring over sharp metal edges or allow to be pinched behind trim to avoid causing an electrical short or break in the wire.
" Manufacturer/distributor not responsible for installation-related damage to vehicle.
" Contact original purchase source if additional information is desired regarding these products.
" For installation situations that installer is not familiar with, a qualified installation technician or mechanic should be consulted for assistance.
" Use wire ties to hold wires away from hot engine and critical parts such as brake and steering systems.
" Do not cut or try to modify temperature sensor harness in any way.
" Contact your local auto dealership or auto sound center to obtain detailed information pertaining to your specific automobile wire color information.

Source