Turbo Timer R907 Installation & Operation Manual

Wiring Diagram
Connect black wire of Turbo Timer to vehicle body for grounding. Connect blue wire of Turbo Timer to connector ends to detect correct connection end, switch between OFF-ACC-ON at the mean time.
When have power supply, LED power indicator will be ON. Switch key to ON position and LED indicator is ON, if there are 2 more ends can turn on LED indicator except 8 & 9 , or key cylinder doesn’t have ACC position, please connect yellow and blue wire as following steps:
- Switch key to ST position, indicator is ON when connect to yellow wire, is OFF when connect to blue wire. Black Grounding (Connector) Grey Hand brake switch
If yellow and blue wire is connected reversely, Turbo Timer will operate when switch key to ST position.
- If still have 2ends can turn on LED indicator when switch key to ST position, connect these 2ends in any way, it won’t be problem. Refer to following information for connection if vehicle has “keycylinder indication.
Red B ˆAM ˆAM1 ˆAM2
Blue ACC
Yellow IG
Black is for grounding.
If IG have IG1& IG2 two ends ¨connect yellow and blue with IG1 & IG2 separately.

Source