Honda CR-V DVD Navigation Attachment

DVD AVN Navigation Unit P/N: 08A40-1J6-100
Wire Harness Routing Precaution
Disconnect the connectors and terminals by holding them. Do not pull the harness to disconnect the connector.
Do not pull the harness with force. it will damage the har ness.
Cut off the excess of the wire ties.
Connect the connectors and terminals securely until they lock.
Reinstall the connectors to the corresponding stays whenever they are removed. After operation, check that the connectors are installed on the stays securely and not loose or come out of the stays.

2005-2006 Chrysler 300C Vehicle Wiring

WIRING INFORMATION: 2005 Chrysler 300C WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE Must go to battery for 12V constant. STARTER WIRE PINK/DK.GREEN Ignition Harness SECOND STARTER WIRE PURPLE/BROWN Ignition Harness The second starter wire is a negative trigger through a 180-ohm resistor. IGNITION WIRE PINK/WHITE Ignition Harness ACCESSORY WIRE PURPLE/BROWN Ignition Harness The accessory wire is the same wire as the second starter wire. The accessory wire is a negative trigger through a 610-ohm resistor. POWER DOOR LOCK AND UNLOCK PURPLE/DK.GREEN Harness In Driver’s Kick Panel Lock is a negative trigger through a 330-ohm resistor. Unlock is

02 Honda CR-V Creaking From A-Pillar When Turning Left

If owners of ’02 CR-Vs are complaining of a creaking from the A-pillar when turning left, the problem may be the right front engine mount on the cam chain side. If the rubber in the mount is misadjusted or faulty, it can make a creaking, ticking, or spot-weld-like noise that seems to be coming from the base of the front passenger’s A-pillar.

2008 Fiat Full Grande 360 Limited Edition

Two limited edition versions of Fiat’s best-selling models have just gone on sale – with the emphasis on exceptional levels of equipment and superb value for money. Both cars – the Panda Special Series 360 and the Grande Punto Special Series 360 – are available now through Fiat’s 162-strong UK dealer network until the end of the year.

1999 Mercedes Benz Truck ML 430 AR68.10-P-1000GH Remove/Install Instrument Panel

Removing And Installing Instrument Panel
Remove/Install
1 Remove instrument panel bottom section (1()
2 Remove A-pillar trim on left and right
3 Remove upper section of air outlet panel (1) Long wedge: See Special Tools below.
4 Unscrew screws (3) from upper side of instrument panel
5 Remove instrument cluster (A1 remove
6.1 Disconnect sun sensor connector
NOTE: Only as of 01.09.01: Connector is located behind instrument cluster

Chrysler Pasifica DVD Rear Seat Video System Installation

A – Interior Trim Panel and Component Removal:
1) Disconnect and isolate negative battery cable.
2) Detach the center console shift bezel.
3) Remove ignition key bezel.
4) Remove left and right I/P center bezels using a non-metal trim stick.
5) Disconnect and remove the CD/DVD player or cubby bin (four phillips screws).
6) Disconnect and remove the radio (four phillips screws).