Showing posts with label light switch. Show all posts
Showing posts with label light switch. Show all posts

Tuesday, June 22, 2010

2003-2005 Honda Pilot Vehicle Wiring

WIRING INFORMATION: 2003 Honda Pilot WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE WHITE Ignition Harness STARTER WIRE BLACK/WHITE Ignition Harness IGNITION WIRE BLACK/YELLOW Ignition Harness ACCESSORY WIRE YELLOW Ignition Harness SECOND ACCESSORY WIRE WHITE/BLACK Ignition Harness POWER DOOR LOCK (-) BLUE/GREEN Large Green Harness At Passenger Fuse POWER DOOR UNLOCK (-) BLACK/RED Box Test door lock wires while turning the key in the passenger door. PARKING LIGHTS (+) RED/BLACK Plug At Driver Fuse Box DOOR

2005-2006 Chrysler 300C Vehicle Wiring

WIRING INFORMATION: 2005 Chrysler 300C WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE Must go to battery for 12V constant. STARTER WIRE PINK/DK.GREEN Ignition Harness SECOND STARTER WIRE PURPLE/BROWN Ignition Harness The second starter wire is a negative trigger through a 180-ohm resistor. IGNITION WIRE PINK/WHITE Ignition Harness ACCESSORY WIRE PURPLE/BROWN Ignition Harness The accessory wire is the same wire as the second starter wire. The accessory wire is a negative trigger through a 610-ohm resistor. POWER DOOR LOCK AND UNLOCK PURPLE/DK.GREEN Harness In Driver’s Kick Panel Lock is a negative trigger through a 330-ohm resistor. Unlock is

Tuesday, May 18, 2010

Disabling Daytime Running Lights (DRL) for VW Passat

A wiring diagram of the headlights for the 2001.5 VW Passat (may or may not apply to other model years). First method: Pulling out DRL relay 173 The fuse panel with cover. The driver side door has to be open. Remove the fuse panel cover. Start by prying through the notch shown above. These were done on a 2001.5 Volkswagen Passat 1.8T. It may also apply to other model years and trims. Look inside behind the fuse panel. You'll see the relay panel and relay 173. A closer look at relay 173 installed. Pull relay 173 out to disable the daytime running lights.
Second method: Modifying the light switch The pin connectors at the back of the light switch.