Showing posts with label pin switch. Show all posts
Showing posts with label pin switch. Show all posts

Monday, August 23, 2010

Remote Starter Integration for the 2007 Toyota Camry equipped with the Smart Key System with Push Button Start

Preparation the Toyota Camry for installation
-Remove the driver’s side under dash, as well as the knee airbag bolts. Move the Airbag aside, but DO NOT DISCONNECT the Airbag connector in order to avoid setting any vehicle codes.
-Remove the driver’s side floor heating duct, in order to access the vehicle IMI & IMO wires easily.
The remote car starter will be installed in a conventional manner even if the car is equipped with the Smart Key “Push-to-Start” system.

Tuesday, June 22, 2010

2003-2005 Honda Pilot Vehicle Wiring

WIRING INFORMATION: 2003 Honda Pilot WIRE WIRE COLOR WIRE LOCATION 12V CONSTANT WIRE WHITE Ignition Harness STARTER WIRE BLACK/WHITE Ignition Harness IGNITION WIRE BLACK/YELLOW Ignition Harness ACCESSORY WIRE YELLOW Ignition Harness SECOND ACCESSORY WIRE WHITE/BLACK Ignition Harness POWER DOOR LOCK (-) BLUE/GREEN Large Green Harness At Passenger Fuse POWER DOOR UNLOCK (-) BLACK/RED Box Test door lock wires while turning the key in the passenger door. PARKING LIGHTS (+) RED/BLACK Plug At Driver Fuse Box DOOR

Friday, May 21, 2010

2008 Dodge Grand Caravan / Chrysler Town Dealer Installed Factory Remote Start Components

This instructional manual will discuss the installation of the hood switch harness & XBM (Remote Start) turn-on. Other steps will include replacement procedure of the WIN, antenna installation, hood switch installation, and uploading of vehicle configuration from Dealer Connect. Refer to the vehicle Service Manual for specific installation procedures for all components except the hood switch harness, which is covered here in detail.