2007 Toyota Camry Hybrid Sirius XM Radio Satellite Installation

Cable Routing and Installation (a) Install and route the tuner cable from the center cluster and along the front support bar. (Fig. 3-1) (b) Provide sufficient cable slack to connect to the tuner, and then secure the cable to the existing wire harness with lock tie. Cut excess off lock tie. Connect wire harness to head unit. (c) Using lock ties attach to existing W /H. Trim lock tie excess. (Fig. 3-2) (d) Route to the existing clamps. (Fig. 3-2) (f) Route the cable as shown and secure with lock tie. Trim lock tie excess. (Fig. 3-4) (g) Route the tuner cable under the rear passenger seat and secure with cushion tape. (Fig. 3-5) NOTE:Clean the area for the cushion tape with the approved cleaner.

2008 Dodge Grand Caravan / Chrysler Town Dealer Installed Factory Remote Start Components

This instructional manual will discuss the installation of the hood switch harness & XBM (Remote Start) turn-on. Other steps will include replacement procedure of the WIN, antenna installation, hood switch installation, and uploading of vehicle configuration from Dealer Connect. Refer to the vehicle Service Manual for specific installation procedures for all components except the hood switch harness, which is covered here in detail.