Dashboard Component Removal/Installation
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
NOTE: Take care not to scratch the dashboard and related parts.
Instrument panel:
1. Remove the center air vent.
2. Remove the climate control unit and audio unit as an assembly ('96 - 98 models, '99 - 04 models). NOTE: Do not disconnect the connectors.
3. Remove the dashboard lower cover and driver's switch trim.
4. Remove the screws, detach the clips, then carefully pull out the instrument panel in the numbered sequence. Disconnect the connector, then remove it.
Showing posts with label component removal. Show all posts
Showing posts with label component removal. Show all posts
Wednesday, August 25, 2010
1997 Acura RL V6-3474cc 3.5L Dashboard / Instrument Panel Service Repair
3:32 AM by onesecond
·
0
comments
Labels: Acura, acura rl, air vent, caution, climate control unit, component locations, component removal, dashboard, flat metal plate, flat tip, instrument panel, models, preset buttons, radio, screw, screws, skirt
Labels: Acura, acura rl, air vent, caution, climate control unit, component locations, component removal, dashboard, flat metal plate, flat tip, instrument panel, models, preset buttons, radio, screw, screws, skirt
Thursday, May 6, 2010
Chrysler Pasifica DVD Rear Seat Video System Installation
3:31 AM by onesecond
·
0
comments
Labels: access panel, bezel, Chrysler, chrysler pasifica, component removal, cubby, dotted lines, masking tape, metal trim, negative battery cable, phillips screw, phillips screws, pillar, radio four, rear seat, t20, template instructions, tie straps, utility knife, video system
Labels: access panel, bezel, Chrysler, chrysler pasifica, component removal, cubby, dotted lines, masking tape, metal trim, negative battery cable, phillips screw, phillips screws, pillar, radio four, rear seat, t20, template instructions, tie straps, utility knife, video system
A – Interior Trim Panel and Component Removal:
1) Disconnect and isolate negative battery cable.
2) Detach the center console shift bezel.
3) Remove ignition key bezel.
4) Remove left and right I/P center bezels using a non-metal trim stick.
5) Disconnect and remove the CD/DVD player or cubby bin (four phillips screws).
6) Disconnect and remove the radio (four phillips screws).
1) Disconnect and isolate negative battery cable.
2) Detach the center console shift bezel.
3) Remove ignition key bezel.
4) Remove left and right I/P center bezels using a non-metal trim stick.
5) Disconnect and remove the CD/DVD player or cubby bin (four phillips screws).
6) Disconnect and remove the radio (four phillips screws).
Subscribe to:
Posts (Atom)
