Showing posts with label climate control unit. Show all posts
Showing posts with label climate control unit. Show all posts
Thursday, August 26, 2010
1996-1998 ACURA 3.5 RL w/o GPS Part Number AC-55-96 Instructions
1:28 AM by onesecond
·
0
comments
Labels: 8mm socket, Acura, air duct, ashtray, bezel, climate control unit, cor, gauge, hex head screws, hook tool, padding, seam, set screws, shifter knob, socket driver, step 1, step 2, step 3, upward pressure, wood grain
Labels: 8mm socket, Acura, air duct, ashtray, bezel, climate control unit, cor, gauge, hex head screws, hook tool, padding, seam, set screws, shifter knob, socket driver, step 1, step 2, step 3, upward pressure, wood grain
STEP 1. Begin by inserting the hook tool underneath the right rear corner of the black trim bezel that surrounds the shifter lever. Pull upward to release one (1) plastic clip. Perform this same action in the remaining three (3) corners on the bezel, releasing three (3) more plastic clips. Slide the bezel over the shifter knob and disconnect all wiring. Set the bezel aside. Remove the wood grain trim bezel that surrounds the shifter. This bezel also has the ashtray integrated into it. Insert your hook tool underneath the right rear corner of this bezel and pull upward to release right rear clip. Insert the hook tool underneath the left rear cor- ner of the bezel and pull upward to release left rear clip. There are two more clips holding the bezel in place located in front of the shifter just behind the ashtray. Insert your hook tool between the center console padding and the trim bezel on the right side of bezel. Pull upward to release clip. Perform this same action on the left side. Grasp the
Wednesday, August 25, 2010
1997 Acura RL V6-3474cc 3.5L Dashboard / Instrument Panel Service Repair
3:32 AM by onesecond
·
0
comments
Labels: Acura, acura rl, air vent, caution, climate control unit, component locations, component removal, dashboard, flat metal plate, flat tip, instrument panel, models, preset buttons, radio, screw, screws, skirt
Labels: Acura, acura rl, air vent, caution, climate control unit, component locations, component removal, dashboard, flat metal plate, flat tip, instrument panel, models, preset buttons, radio, screw, screws, skirt
Dashboard Component Removal/Installation
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
NOTE: Take care not to scratch the dashboard and related parts.
Instrument panel:
1. Remove the center air vent.
2. Remove the climate control unit and audio unit as an assembly ('96 - 98 models, '99 - 04 models). NOTE: Do not disconnect the connectors.
3. Remove the dashboard lower cover and driver's switch trim.
4. Remove the screws, detach the clips, then carefully pull out the instrument panel in the numbered sequence. Disconnect the connector, then remove it.
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
NOTE: Take care not to scratch the dashboard and related parts.
Instrument panel:
1. Remove the center air vent.
2. Remove the climate control unit and audio unit as an assembly ('96 - 98 models, '99 - 04 models). NOTE: Do not disconnect the connectors.
3. Remove the dashboard lower cover and driver's switch trim.
4. Remove the screws, detach the clips, then carefully pull out the instrument panel in the numbered sequence. Disconnect the connector, then remove it.
Subscribe to:
Posts (Atom)
