Showing posts with label shifter knob. Show all posts
Showing posts with label shifter knob. Show all posts
Thursday, August 26, 2010
1996-1998 ACURA 3.5 RL w/o GPS Part Number AC-55-96 Instructions
1:28 AM by onesecond
·
0
comments
Labels: 8mm socket, Acura, air duct, ashtray, bezel, climate control unit, cor, gauge, hex head screws, hook tool, padding, seam, set screws, shifter knob, socket driver, step 1, step 2, step 3, upward pressure, wood grain
Labels: 8mm socket, Acura, air duct, ashtray, bezel, climate control unit, cor, gauge, hex head screws, hook tool, padding, seam, set screws, shifter knob, socket driver, step 1, step 2, step 3, upward pressure, wood grain
STEP 1. Begin by inserting the hook tool underneath the right rear corner of the black trim bezel that surrounds the shifter lever. Pull upward to release one (1) plastic clip. Perform this same action in the remaining three (3) corners on the bezel, releasing three (3) more plastic clips. Slide the bezel over the shifter knob and disconnect all wiring. Set the bezel aside. Remove the wood grain trim bezel that surrounds the shifter. This bezel also has the ashtray integrated into it. Insert your hook tool underneath the right rear corner of this bezel and pull upward to release right rear clip. Insert the hook tool underneath the left rear cor- ner of the bezel and pull upward to release left rear clip. There are two more clips holding the bezel in place located in front of the shifter just behind the ashtray. Insert your hook tool between the center console padding and the trim bezel on the right side of bezel. Pull upward to release clip. Perform this same action on the left side. Grasp the
Sunday, May 23, 2010
1992-95 Cadillac Eldorado & Seville Pro.Vit VSM Installation
3:37 AM by onesecond
·
0
comments
Labels: 10mm nuts, 10mm socket, bezel, Cadillac, cadillac eldorado, cavity, eldorado, eldorado seville, hook tool, PDF Download, pro fit, protective cloth, radio out, ratchet, screw, screws, shifter knob, step 2, step 3
Labels: 10mm nuts, 10mm socket, bezel, Cadillac, cadillac eldorado, cavity, eldorado, eldorado seville, hook tool, PDF Download, pro fit, protective cloth, radio out, ratchet, screw, screws, shifter knob, step 2, step 3
STEP 1. Begin by removing the small black trim ring that surrounds the radio. Insert the hook tool behind the upper right corner of the trim ring and pull toward you to loosen the ring. Once the ring is loose, work the remaining three (3) corners of the trim ring loose. Set the trim ring aside. Turn the ignition to the “ON” position and shift the transmission into low gear. Just above the ashtray door, grasp the top section of the bezel that surrounds the transmission shifter and pull toward you to release two (2) clips. Insert the hook tool behind the right rear corner of the bezel just behind the shifter. Pull upward to release one (1) clip. Perform the same action in the left rear corner releasing one (1) more clip. Grasp the rear of the bezel and continue working loose two (2) clips on the left and right sides of the shifter. Work the bezel up and over the shifter knob and disconnect all wiring. Set the bezel aside.
Subscribe to:
Posts (Atom)
