An Applied Vehicle has a MIL “On” and has one or both of the following DTCs stored in the ECM:
• P0442 EVAP Small Leak
• P0456 EVAP Very Small Leak
ACTIONS:
Confirm this bulletin applies. Perform CONSULT-II Self-Diagnosis (repair as needed). ECM Part Number Check to determine if this bulletin applies. ECM Reprogramming (needed if a match is found during ECM Part Number Check).
IMPORTANT: The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure (starting on page 2) as it contains information that is essential to successfully completing this repair.
Showing posts with label diagnosis results. Show all posts
Showing posts with label diagnosis results. Show all posts
Thursday, October 28, 2010
2003 350Z MIL ‘ON’ DTC P0442 (Evap Small Leak) Stored In Self Diagnosis Results
2:13 AM by onesecond
·
0
comments
Labels: confirmation, diagnosis results, dtcs, ecm, electronic service, figure 1, freeze frame, match, necessary repair, Nissan, nissan engine, p0442, self diagnosis, step 1
Labels: confirmation, diagnosis results, dtcs, ecm, electronic service, figure 1, freeze frame, match, necessary repair, Nissan, nissan engine, p0442, self diagnosis, step 1
Saturday, May 15, 2010
2000-2002 G20 Mil ON Rear O2 Sensor DTC
10:04 PM by onesecond
·
0
comments
Labels: bank 1, diagnosis results, dtc, dtcs, ecm, figure 1, high voltage, Infiniti, max voltage, o2 sensor, oxygen sensor, self diagnosis
Labels: bank 1, diagnosis results, dtc, dtcs, ecm, figure 1, high voltage, Infiniti, max voltage, o2 sensor, oxygen sensor, self diagnosis
If a 2000 to 2002 G20 has a MIL "On" and any of the following DTCs stored in the ECM:
• P0138 Heated Oxygen Sensor 2 (Rear) (Bank 1) (Max. Voltage Monitoring)
• P0139 Heated Oxygen Sensor 2 (Rear) (Bank 1) (Response Monitoring)
• P0140 Heated Oxygen Sensor 2 (Rear) (Bank 1) (High Voltage)
Start with the Service Procedure to find out if the bulletin applies to this vehicle. If it does apply, complete the Service Procedure to repair the incident, if it should occur.
• P0138 Heated Oxygen Sensor 2 (Rear) (Bank 1) (Max. Voltage Monitoring)
• P0139 Heated Oxygen Sensor 2 (Rear) (Bank 1) (Response Monitoring)
• P0140 Heated Oxygen Sensor 2 (Rear) (Bank 1) (High Voltage)
Start with the Service Procedure to find out if the bulletin applies to this vehicle. If it does apply, complete the Service Procedure to repair the incident, if it should occur.
Subscribe to:
Posts (Atom)
