Procedure installing the Grill to Honda CRV
1. Remove the plastic rivets securing the plastic guard located underneath the vehicle in order to install the front bar.
2. Start with the passenger side assembly, postion one of the 7/16 nut plates behind the cross member opening and align the 7/16 nut plate wit the two matching holes in the frame rail. Fasten the frame brackets to the bottom cross member as shown in the illustration using the 7/16 x 1 ¼ hex bolts, 7/16 washers, 5/16 self tapping bolt and 5/16 washers. Note: Do not over tighten 5/16 x 1 self tapping bolt as it might strip threads.
Showing posts with label cross member. Show all posts
Showing posts with label cross member. Show all posts
Sunday, November 14, 2010
2005-06 HONDA CRV Grill/ Brush Guard Part #6049
1:39 AM by onesecond
·
0
comments
Labels: bolt, brackets, brush guard, cross member, fasteners, frame rail, hex bolts, hex nuts, holes, Honda, honda crv, illustration, inner edge, screw, screws, slots, support bracket, tapping, utility knife, wit
Labels: bolt, brackets, brush guard, cross member, fasteners, frame rail, hex bolts, hex nuts, holes, Honda, honda crv, illustration, inner edge, screw, screws, slots, support bracket, tapping, utility knife, wit
Friday, June 11, 2010
Honda Civic, Acura Integra Gauge Bezel Models 20010 and 20011 Installation
8:49 PM by onesecond
·
0
comments
Labels: Acura, acura integra, aluminum bracket, bezel, bottom center, center screw, cluster housing, cross member, ew, gauge bezel, gauge cluster, gauge wiring, Honda, honda civic, models, paint, press fit, screws, stock gauge, stud
Labels: Acura, acura integra, aluminum bracket, bezel, bottom center, center screw, cluster housing, cross member, ew, gauge bezel, gauge cluster, gauge wiring, Honda, honda civic, models, paint, press fit, screws, stock gauge, stud
NOTE: Gauge bezel can be painted using a plastic safe paint.
1. Remove stock gauge bezel.
2. Acura Integra - Drill 7⁄64" hole in the plastic cross member. Install aluminum bracket (Fig. 1). Bracket stud should align with hole in lower center of gauge bezel. Honda Civic - Remove bottom center screw from gauge cluster housing. Reinstall screw and supplied aluminum bracket (Fig. 2).
1. Remove stock gauge bezel.
2. Acura Integra - Drill 7⁄64" hole in the plastic cross member. Install aluminum bracket (Fig. 1). Bracket stud should align with hole in lower center of gauge bezel. Honda Civic - Remove bottom center screw from gauge cluster housing. Reinstall screw and supplied aluminum bracket (Fig. 2).
Tuesday, May 18, 2010
1982 Mercedes Benz 240D (123 Chassis) Engine Oil Pan Service
3:15 PM by onesecond
·
0
comments
Labels: automatic transmissions, control rods, crankcase, cross member, engine oil pan, gaiter, gear oil, longitudinal control, Mercedes Benz, mercedes benz 240d, model features, oil bath air, oil bath air cleaners, oil cooler, pan service, power steering pump, refrigeration compressor, shock absorber, throttle body, v belt
Labels: automatic transmissions, control rods, crankcase, cross member, engine oil pan, gaiter, gear oil, longitudinal control, Mercedes Benz, mercedes benz 240d, model features, oil bath air, oil bath air cleaners, oil cooler, pan service, power steering pump, refrigeration compressor, shock absorber, throttle body, v belt
Removal 1 Drain engine oil. 2 Lift engine hood to 90°position and lock left-hand latch (arrow). 3 On engine 617, remove adapter at air cleaner (arrow). On models with oil bath air cleaners, release and remove rubber gaiter from throttle body. 4 If model features uprated engine, also remove longitudinal control spindle. Unhook control rods for this purpose. Withdraw retainer (arrow) and force longitudinal control spindle in aft direction. 5 Unscrew clip attaching oil dipstick guide tube to power steering pump bracket and crankcase. 6 On models with power steering,
Subscribe to:
Posts (Atom)
