1988-1995 Chevy V8 305 & 350 TBI Airaid Intake System Installation

Remove Factory Intake Assembly
a) Loosen the wing on the top of the factory air intake assembly and remove assembly from vehicle.
b) Remove and discard the 1” crankcase breather ring. See Fig#1 (save valve cover breather tube for later use)
c) Use a 13mm socket and wrench to remove the strap that secures the silencer tube on the passenger side fender housing. See Fig#2
d) Remove entire factory air cleaner assembly from vehicle.

2001-2008 Mazda Tribute 3.0L Chamshaft Ticking Noise Service Bulletin

This bulletin supersedes the previous bulletin 01-032/06, issued on 10/12/2006. The APPLICABLE MODEL(S)/ VINS, DESCRIPTION, REPAIR PROCEDURE, and WARRANTY INFORMATION have been revised. Some vehicles equipped with a 3.0L engine may exhibit a ticking noise from the left bank cylinder head while the engine is running at normal operating temperature. Customers having this concern should have their vehicle repaired using the following repair procedure. Use the table below to select the correct repair for the applicable model.

1984-1995 Honda Accord/Prelude Emissions PVC testing

The PCV valve is easily checked with the engine running at normal idle speed (warmed up). Gently pinch the hose shut, then release it; the valve should click. If there is no click, check for plugged hoses or ports. If these are open, the valve is faulty. With the engine OFF, remove the valve from the engine. Shake it, listening for the rattle of the plunger inside the valve. If no rattle is heard, the plunger is jammed (probably with oil sludge) and should be replaced. Never operate the engine without the PCV valve or with the hose blocked.
Don't blow directly into the valve in an effort to free the plunger; petroleum vapors and deposits within the valve are harmful.