Always use Genuine Honda Power Steering Fluid. If it is not available, you may use another power steering fluid as an emergency replacement. However, continued use can cause increased wear and poor steering in cold weather. Have the power steering system flushed and refilled with Honda PSF as soon as possible. A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently and have the system inspected as soon as possible.
Showing posts with label hold down. Show all posts
Showing posts with label hold down. Show all posts
Tuesday, October 12, 2010
Power Steering, Air Cleaner Element
11:45 PM by onesecond
·
0
comments
Labels: air cleaner, air flow, clamps, cold weather, damp rag, element, emergency replacement, engine compartment, genuine honda, hold down, Honda, honda dealer, honda power steering fluid, maintenance schedule, power steering fluid, power steering pump, psf, steering wheel, time and distance, wheel
Labels: air cleaner, air flow, clamps, cold weather, damp rag, element, emergency replacement, engine compartment, genuine honda, hold down, Honda, honda dealer, honda power steering fluid, maintenance schedule, power steering fluid, power steering pump, psf, steering wheel, time and distance, wheel
Wednesday, June 9, 2010
1988-1995 Chevy V8 305 & 350 TBI Airaid Intake System Installation
5:29 AM by onesecond
·
0
comments
Labels: air cleaner, air intake, airaid intake system, bolt, bores, breather tube, Chevrolet, chevy v8, crankcase, crankcase breather, cylinder head, dipstick tube, hold down, mounting bracket, PDF Download, side fender, stud, studs, throttle body, valve cover
Labels: air cleaner, air intake, airaid intake system, bolt, bores, breather tube, Chevrolet, chevy v8, crankcase, crankcase breather, cylinder head, dipstick tube, hold down, mounting bracket, PDF Download, side fender, stud, studs, throttle body, valve cover
Remove Factory Intake Assembly
a) Loosen the wing on the top of the factory air intake assembly and remove assembly from vehicle.
b) Remove and discard the 1” crankcase breather ring. See Fig#1 (save valve cover breather tube for later use)
c) Use a 13mm socket and wrench to remove the strap that secures the silencer tube on the passenger side fender housing. See Fig#2
d) Remove entire factory air cleaner assembly from vehicle.
a) Loosen the wing on the top of the factory air intake assembly and remove assembly from vehicle.
b) Remove and discard the 1” crankcase breather ring. See Fig#1 (save valve cover breather tube for later use)
c) Use a 13mm socket and wrench to remove the strap that secures the silencer tube on the passenger side fender housing. See Fig#2
d) Remove entire factory air cleaner assembly from vehicle.
Subscribe to:
Posts (Atom)
