All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break. Pro.Fit logo and part number will be right side up and readable when installed.
TOOLS REQUIRED: #2 Phillips screwdriver, hook tool.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: To the right of the radio.
Showing posts with label phillips screwdriver. Show all posts
Showing posts with label phillips screwdriver. Show all posts
Monday, August 23, 2010
1992-96 Toyota Camry Pro.Fit Part Number TY-50-92 Installation Instructions
8:11 PM by onesecond
·
0
comments
Labels: bezel, camry, cigarette, drivers seat, hook tool, phillips screwdriver, point caution, pro fit, radio, screw hole, side step, step 3, Toyota, toyota camry, ty, unnecessary force, vantage point, wiring harness
Labels: bezel, camry, cigarette, drivers seat, hook tool, phillips screwdriver, point caution, pro fit, radio, screw hole, side step, step 3, Toyota, toyota camry, ty, unnecessary force, vantage point, wiring harness
Sunday, May 23, 2010
07-Up Chevy Tahoe LED Upper Quarter Panel Light
3:05 AM by onesecond
·
0
comments
Labels: Chevrolet, chevy tahoe, clamps, figure c, ipcw, PDF Download, phillips screwdriver, quarter panel, screw, screws, sockets, stock, tail light
Labels: Chevrolet, chevy tahoe, clamps, figure c, ipcw, PDF Download, phillips screwdriver, quarter panel, screw, screws, sockets, stock, tail light
Your new IPCW LED Upper Quarter Panel Lights are quality-made products that will work beautifully on your vehicle. Please refer to the pictures below for installation instructions.
Remove the screws in Figure A with a Phillips screwdriver. Untwist the sockets, then gently slide out the tail light.
After the tail light is removed. remove the screw in Figure B.
Remove the screw in Figure C to remove the Upper Quarter panel.
Gently slide out the stock Upper Quarter Panel.
Remove the screws in Figure A with a Phillips screwdriver. Untwist the sockets, then gently slide out the tail light.
After the tail light is removed. remove the screw in Figure B.
Remove the screw in Figure C to remove the Upper Quarter panel.
Gently slide out the stock Upper Quarter Panel.
Saturday, March 20, 2010
6-Speed Short Shift Install
12:52 AM by onesecond
·
0
comments
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
1. Open the package and make sure you received all the appropriate parts.
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
Subscribe to:
Posts (Atom)
