This “how to” guide installs the kit into a Z4 with no CD changer and a standard business cd (no sat nav), ipod location in the central compartment.
1: The kit
2: Disconnect battery with 10mm socket
3: Now it’s a bit of a pain, but to get easier access to centre console I removed the boot carpet. Use a large flat head screwdriver to remove the retaining screws on the left and the right hand side of the boot. You need to reach behind the carpet to hold the nut at the back.
Showing posts with label socket 3. Show all posts
Showing posts with label socket 3. Show all posts
Saturday, March 27, 2010
DICE ipod BMW Z4 Installation
3:28 AM by onesecond
·
0
comments
Labels: BMW, bmw z4, business cd, carpet, cd changer, cockpit, fiddle, interface cable, left hand side, loose wires, PDF Download, pin connector, screw, screws, socket 3, tunes
Labels: BMW, bmw z4, business cd, carpet, cd changer, cockpit, fiddle, interface cable, left hand side, loose wires, PDF Download, pin connector, screw, screws, socket 3, tunes
Saturday, March 20, 2010
6-Speed Short Shift Install
12:52 AM by onesecond
·
0
comments
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
Labels: 10mm socket, backside, bolts, box lid, flat blade, intake tube, lock washer, lock washers, nicety, PDF Download, phillips screwdriver, pin clip, red arrow, shaft, short shift, socket 3, torx screws, weights
1. Open the package and make sure you received all the appropriate parts.
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
There should be:
• Cast Shifter Arm
• Five (5) small weights
• Two (2) large weights
• One (1) shifter arm pin c/w lock washer
• Six (6) bolts: (2) short, (2) medium and (2) long, lock washers(2)
2. Start by getting all the appropriate tools that you will need:
• Flat-blade screwdriver
• Phillips screwdriver
• 10mm wrench and socket
• 13mm socket
• 14mm wrench/socket
Subscribe to:
Posts (Atom)
